Wrinkle & Basic Blemish Removal with Mocha AE and After Effects CC

mocha_AE_logo

Beauty retouching has evolved throughout the ages. First, we had make up artists who would do their best to mask and cover various blemishes. Over time, it became possible to retouch photographs by hand to cover any blemishes the makeup artist was not able to clear. Now, we are not only able to retouch images, but high resolution video itself. Right now there is a growing niche market of beauty retouchers and artists taking on the role of a “digital make up artist,” retouching and removing various wrinkles, blemishes, shine, and more. I will show you how to remove wrinkles and basic blemishes using a combination of Mocha AE and After Effects CC in three easy steps:

– Create a Main Track in Mocha

– Create cover layers in Mocha

– Export and Composite in After Effects

 CREATE A MAIN TRACK IN MOCHA

With your footage in Mocha, first look at your subject and decide where exactly your will be focusing.

Screen Shot 2015-08-31 at 9.16.12 PM

Looking at my subject, I can see she has some general light blemish marks along her left cheek. Additionally, as she scrunches up her mouth she creates a dimple in the corner of her mouth which will act as a good “wrinkle” example for us, as well to show the range of this techniques use.

The goal here is to smooth out that dimple in the corner of her mouth while also blending away those light blemishes along her cheek. In the footage, she keeps her head in that general direction. This allows certain features of the face to be ideal for motion tracking, such as the eyebrows, chin, and nose (the ear and hairline is also good, however, in this sample the hair is covered by the ear and the wind is blowing her hair around her forehead, making these options not possible). Using the X spline tool, create a generic shape around the eyebrows, chin, and nose and TRACK FORWARD.

Screen Shot 2015-08-31 at 9.30.35 PM

You can label that layer in your LAYERS PANEL as MAIN TRACKER to help stay organized. We will not create an additional layer that we can animate over the course of the clip while linking it to the Main tracker for general motion.

CREATE COVER LAYER IN MOCHA

The Main track is to capture the overall movement of the camera and of subject’s head and face. Throughout the clip, the subject moves their mouth slightly with a few other facial muscles contorting. We need to create a cover layer that will focus on the wrinkle and blemish area while also remaining flexible as the subject contorts their face and mouth. From here, I am going to create a cover layer focusing on the areas mentioned.

Screen Shot 2015-08-31 at 9.45.00 PM

The mask at first seems a bit jagged, so highlight all the points, right click, and go to POINT > SMOOTH

Screen Shot 2015-08-31 at 9.48.35 PM

Screen Shot 2015-08-31 at 9.48.46 PM

Now, make sure you have that new cover layer highlighted and go to LINK TO TRACK > MAIN TRACKER. This will now link the cover layer to the main tracker allowing it to follow along with the camera and facial movement. For the fine tuning of the face contorting throughout the clip, scrub through the footage. As you see the mask intersecting with areas of the mouth and her movement, grab the points and adjust accordingly. This will create a keyframe on the timeline indicating that the mask will be in that form at that exact point on the timeline. Continue to scrub through the footage adjusting all remaining points as needed.

Screen Shot 2015-08-31 at 9.58.04 PM

Screen Shot 2015-08-31 at 9.58.32 PM

Once you think you are finished, let the footage playback a few times and watch the facial movements against your keyframed layer to make sure everything meets your expectations.

EXPORT AND COMPOSITE IN AFTER EFFECTS

Once you are ready to export the cover layer, go to EXPORT SHAPE DATA located in the lower right of the program window. At the pop up window choose COPY TO CLIPBOARD.

Screen Shot 2015-08-31 at 9.59.28 PM

Back in After Effects, create a new Adjustment Layer (CMD + OPT + Y) and then paste the mocha mask shape onto the adjustment layer by going to EDIT > PASTE MOCHA MASK.

Screen Shot 2015-08-31 at 10.04.01 PM

With the cover layer now composited on top of your source clip in After Effects, go ahead and add a BOX BLUR to the Adjustment Layer. Increase the BLUR RADIUS to 10 and open the mask settings and feather the edges to about 15.

Screen Shot 2015-08-31 at 10.06.05 PM

Screen Shot 2015-08-31 at 10.06.16 PM

And now take a look at with the cover layer on and off

ON

Screen Shot 2015-08-31 at 10.06.52 PM

OFF

Screen Shot 2015-08-31 at 10.07.08 PM

You can see the blemishes have been removed and there is a general smoothness to the dimple around her mouth as well. As you increase the BLUR RADIUS, you can further smooth out the wrinkle. Be warned that increasing this too much will distort the image and will not look realistic whatsoever. You’ll need to use finesse. In another lesson, I will go into more detail on how to eliminate glaring blemishes, scars, and birth marks.

Royalty_Free_Music_Orange_468_60_Yellow_Dress_zps3d728d61

 

Scar Blemish and Birthmark Removal in Mocha and After Effects CC

mocha_AE_logo

In this day and age of digital revolution, it should be no surprise that make up artists are not the only coverage actors and actresses receive these days for blemishes, scars, shine, wrinkles, and more. Digital beauty retouching is a growing niche market where VFX artists are now able to accurately track the motion of their subjects face throughout the course of the video clip, and then isolate the blemished areas and clean them up further and more accurate than any makeup can cover. In a previous tutorial, I showed how to create a basic cover that can eliminate wrinkles and basic textured blemishes. In this tutorial, I wanted to focus on the harsher blemishes, scars, and birth marks that tend to stand out more prominently, and need some more direct care to treat.

I will break the technique down into three steps:

– Creating an isolated primary track

– Creating a Linked Mask of a Clear Area

– Exporting and Final Composite in After Effects

CREATING AN ISOLATED PRIMARY MASK

With your footage in Mocha, we are first going to create an isolated mask around the prominent blemish, scar, or birthmark. In my sample footage I am going to focus on two areas – one blemish and one mole as an example.

Screen Shot 2015-08-31 at 10.59.44 PM

In the previous, I had you create a general track mask around the whole face. This time, since the blemish area is so prominent, you can zoom in and create a mask just around the problem area itself using the X spline.

Screen Shot 2015-08-31 at 10.59.11 PM

Below the timeline you will find a set of arrows with a letter T by them indicating Track forward and backward. Go ahead and track forward to the end of the clip.

Screen Shot 2015-08-31 at 10.59.31 PM

In your layers panel you can rename the layers to BLEMISH 1 & BLEMISH 2 just to keep things organized.

Screen Shot 2015-08-31 at 10.59.23 PM

CREATING A LINKED MASK OF A CLEAR AREA

Using this tracked data, we are now going to create new layer masks just slightly next to the source blemishes in order to capture a blemish-free and clear reference area to composite over the blemish itself. With the X spline tool, go ahead and create a new layer mask just next to each isolated blemish.

Screen Shot 2015-08-31 at 11.05.28 PM

I also went ahead and changed the color of the cover mask to a blue and renamed the layers to COVER 1 & COVER 2 to keep things organized.

Screen Shot 2015-08-31 at 11.06.36 PM

At this point, LINK both COVER 1 and COVER 2 with their partnering BLEMISH 1 and BLEMISH 2. That way, both covers follow along perfectly with their blemish counterparts.

Screen Shot 2015-08-31 at 11.45.51 PM

Scrub through the footage or simply let it playback and make sure both covers follow perfectly.

EXPORTING AND FINAL COMPOSITE

In this situation you will want to export each cover layer one at a time because you will be compositing each potentially slightly different from one another and will need individual control. With the first cover layer selected, go to EXPORT SHAPE DATA in the lower right of the program window, select it, and choose COPY TO CLIPBOARD on the pop up window.

Screen Shot 2015-08-31 at 11.49.33 PM

Back in after effects we are going to DUPLICATE the source video (CMD + D). With the duplicate video selected go to EDIT > PASTE MOCHA MASK.

Screen Shot 2015-08-31 at 11.51.24 PM

Zoom in on the cover mask and now click and drag the mask over the blemish.

Screen Shot 2015-08-31 at 11.52.17 PM

Open up the Mask controls under the duplicate layer and increase the feather and slightly decrease the expansion. You can also SOLO the layer to see how much feather you are applying.

Screen Shot 2015-08-31 at 11.53.52 PM

Screen Shot 2015-08-31 at 11.53.56 PM

You can now play back the video and make sure the feather and expansion amount is adjusted appropriately so that it looks natural and properly covers the blemish. Repeat the process for Blem 2 and for any other scar or birth mark you need to digitally remove.

Screen Shot 2015-08-31 at 11.56.20 PM

Royalty_Free_Music_Orange_468_60_Yellow_Dress_zps3d728d61

 

Quick Blemish Removal in After Effects CC

after_effects_cs51

Most people, including myself, have some sort of blemish, scar, or imperfection they wish they could keep from showing up on camera. After Effects CC has developed a new matte tracking process that makes removing unsightly blemishes a breeze. In this tutorial I will show you how to complete the effect in three simple steps.

–       Creating the Matte

–       Tracking the Matte

–       Removing the Blemish

Screen Shot 2014-12-29 at 12.31.08 PM

CREATING THE MATTE

To start, lets create a new composition with our footage and take a closer look at what needs to be retouched.

Screen Shot 2014-12-29 at 12.31.23 PM

In this clip I can see we need to do some blemish removal in the cheeks and along the jaw line. Additionally, if you notice near the right ear (stage left) there is a long stray hair we can also quickly take care of with this technique. For now, let’s focus on his right cheek (stage left).

Screen Shot 2014-12-29 at 12.00.00 PM

Essentially, the process is simple but time consuming. We need to focus on each blemish individually, and create a sample clean area that matches the blemished area to be superimposed and smoothed over on top to create a seamless appearance. To do that, first DUPLICATE THE SOURCE FOOTAGE. We will need to duplicate the source footage EACH AND EVERY TIME we need to create a new blemish cover. Then, create a mask that isolates the blemish and the extends out to take a sample of the clean surrounding area; just as this picture shows in detail.

Screen Shot 2014-12-29 at 12.06.30 PM

TRACKING THE MATTE

By isolating the blemish in the matte it creates a great tracking marker for the program to follow. Now, RIGHT CLICK on the matte and choose TRACK MASK.

Screen Shot 2014-12-29 at 12.09.00 PM

A window in the lower right will now appear with TRACKER CONTROLS

Screen Shot 2014-12-29 at 12.09.11 PM

The default method tracks position, scale, and rotation which will be fine for this example. Next to ANALYZE, select the forward arrow and allow After Effects CC to track the mask throughout the duration of the clip.

Screen Shot 2014-12-29 at 12.12.25 PM

In your timeline, this will create a series of keyframes tracking the mask to your subjects movement. It is important to have a perfect track in order to ensure the blemish cover moves along with the subject to create a seamless and clean appearance. If the track was unsuccessful, some helpful tips would include:

–       Analyze frame by frame and move the mask manually back on point when it loses its subject to ensure a locked track.

–       Start at the end of the timeline and analyze backwards (sometimes starting with a different point in time helps the computer algorithm lock on better and understand your point of focus).

REMOVING THE BLEMISH

Once you have a mask sampling a clean area of the skin and tracked that mask to the subjects face throughout the duration of the clip, it’s time to get rid of that blemish! Using the directional arrows on your keyboard, or clicking and dragging with your mouse, move the mask on top of the blemish area

Screen Shot 2014-12-29 at 12.18.57 PM

Screen Shot 2014-12-29 at 12.19.19 PM

You are probably saying, “That just moved the blemish over with the mask! It didn’t fix anything!” – well – we’re not done yet. At this point, open up the mask tools by having the mask selected in your layer window and hit MM on your keyboard to open up the entire tool set.

Screen Shot 2014-12-29 at 12.22.20 PM

REDUCE the MASK EXPANSION so that the blemish sample disappears and you just have a small sample circle to use.

Screen Shot 2014-12-29 at 12.23.28 PM

INCREASE the MASK FEATHER to smooth out the sample’s circle edges, thusly blending it into the face, creating a smooth and clean finish that follows the face throughout the clip.

Screen Shot 2014-12-29 at 12.24.42 PM

You now just successfully removed ONE blemish. Depending on your subject, you may have more to go. Just repeat the process as described as many times as necessary to create the final retouched image.

Screen Shot 2014-12-29 at 12.31.23 PM

Screen Shot 2014-12-29 at 12.31.08 PM

Royalty_Free_Music_Orange_468_60_Yellow_Dress_zps3d728d61

 

Color Correcting with Adobe SpeedGrade CC for Beginners

 

Adobe_SpeedGrade_CS6_Icon

 

 

Are you interested in learning color correcting and recently subscribed to Adobe’s Creative Cloud? Well if so you’re in luck! Among the numerous programs you can access with the vast Creative Cloud subscription service you will find a relatively new program to the Adobe lineup called SpeedGrade CC.

SpeedGrade CC (Sg) is a dedicated color correcting program that works in a similar layering fashion as all the other Adobe programs you have come to love. Conceptually, think of color correcting with Sg the same as you would with adding an adjustment layer to your raw footage in After Effects, or even Photoshop. You start with your raw footage as the base and add either a Primary Look, Secondary Look, or Custom Look layer (or a combination of the three) to create a final image.

Screen Shot 2013-07-08 at 5.49.45 PM

 

 

I am going to show you how you can take your raw footage from ‘meh’ to ‘amazing’ in 3 simple steps:

  • Importing Your Footage
  • Adding Your Look Layers
  • Rendering Out Your Footage
  1. Importing Your Footage

Once you have the footage you want to correct safely logged on your computer and saved into a folder, open up SpeedGrade, and take notice of your drop down menus in the upper left corner of the program:

Screen Shot 2013-07-11 at 9.21.56 PM

If you have a good filearchy in place you should be able to navigate to your footage by using a series of drop-downs starting with DESKTOP. For me it looked something like DESKTOP >> MEDIA >> VIDEOS >> FREELANCE >> TEST SHOTS. Once you find your folder containing the footage select it and you will see your window populating with the appropriate clips:

Screen Shot 2013-07-11 at 9.27.25 PM

Hover your cursor over the first clip you want to correct and select the plus button in the lower right corner in order to add the footage to your timeline.

Screen Shot 2013-07-11 at 9.28.50 PM

Once your footage is in your timeline select the COLOR tab in the upper right corner.

 

  1. Adding Your Look Layers

 

To add a look to your footage navigate to the LOOK tab in the lower left corner of the program:

Screen Shot 2013-07-11 at 9.31.17 PM

In the look window you will see in the lower left corner +P (Add a Primary Look) +S (Add a Secondary Look) and + (Add a Custom Layer). Outlined as follows is the overview of what each Look layer type is used for and how it operates.

  • Primary Look Layer (+P)

Your primary look layer is, well, your primary layer. This is the layer you add all general changes to tone, contrast, hue, and saturation. Your layers window will automatically have a single Primary Look layer present. To make color adjustments you will notice a series of sliders and wheels you can manipulate:

Screen Shot 2013-07-11 at 9.46.09 PM

Looking at the wheels from left to right: Offset is for Dark Tones, Gamme for Mid Tones, and Gain for Light Tones. You can click and drag on both the sliders and wheels to get the look you are going for. My footage is of some panning over strawberries and I was looking for a warm inviting feel to my footage. To achieve this look I first increased the contract and then pushed the Gamma and Gain towards the yellows and reds until I reached a nice overall warm tone without distracting from the core image.

Screen Shot 2013-07-11 at 9.51.55 PM

 

  • Secondary Look Layer (+S)

With my footage looking pretty good now maybe I will decide that I want to bring back some of the richness of the greens that were lost when pushing in more yellow and reds to the overall image. That is where the secondary look layer comes in. Think of them as ways to key specific colors for isolated manipulation — in this case the green garnish in my image. To do that first select the +S to add a secondary look layer to your layers window. From there use your +eyedropper and select your color you want to isolate.

Screen Shot 2013-07-11 at 10.14.53 PM

At this point you can change your GRAY-OUT viewer to COLOR/GRAY and play with your sliders until you isolate just the color you are looking to manipulate.

Screen Shot 2013-07-11 at 10.16.20 PM

 

Next, make adjustments to the contrast and hue until you reach the look you desire. When you are finished change your GRAY-OUT viewer back to NONE.

Screen Shot 2013-07-11 at 10.17.29 PM

 

  • Custom Look Layer (+)

To finish up, I want to really blow out the whites on this footage and give these strawberries a shimmering, almost dreamy, appearance. To do that I need to add a custom look layer. First, I will hit the + button under the layers window then, for me, select fxBloom — there are a ton of custom looks here to choose from and I encourage you to take the time to review them all. Once I add my bloom custom layer I will go into the sliders and adjust the INTENSITY, THRESHOLD, and BLEND to reach my desired effect.

Screen Shot 2013-07-11 at 10.21.33 PM

  1. Rendering Out Your Footage

Screen Shot 2013-07-11 at 10.24.29 PM

Now I am finished making my color corrections and I want to ready this footage out. To do this first head on over to the RENDER tab in the upper right corner. From there you will want to choose a folder destination and give your footage a file name under the OUTPUT section. In FRAMING you will want to keep the settings at FULL IMAGE and 1:1 (SQUARE) in order to maintain the same framing the footage was imported at. Finally select RENDER under the RENDER section to initiate the process. You will receive a notification once the render is complete.

 

Royalty_Free_Music_Orange_468_60_Yellow_Dress_zps3d728d61