FCPX Tips and Tricks Volume 2

FCP-X-10.2

One of the things I’ve enjoyed about learning the inner workings of Final Cut Pro X is how to work faster despite having a different editing paradigm. Getting used to the magnetic timeline was a struggle at first, but now I’ve become accustomed to it. I find myself trying to do things that are akin to the magnetic timeline that don’t exist in track based NLEs. However, I discovered new tips and tricks from users across the world that make my FCPX experience more enjoyable. I’m going to highlight a few tips that hopefully help you in your FCPX experience.

Connected Clip Tricks

In this episode of MacBreak Studio, the folks at Ripple Training show us how to deal with connected clips. As great as the magnetic timeline can be, dealing with connected clips can be cumbersome. Their first tip involves changing a connected clip to a different primary clip. Holding down the option key, Mark clicks on the bottom of the connected clip and changes the connect to a different clip in the primary storyline.

The next tip involves deleting a primary clip and leaving the connected clip in place, or creating a ripple edit. If you hold down the Shift key and press delete, the primary storyline clip will disappear and the connected clip will be placed above a gap clip. To get the ripple edit, hold down option + command+ delete to perform the delete selection shortcut.

The final tip involves slipping a clip in the primary storyline without moving the connected clip. Holding down the tilde key and pressing the T key, you can slip your primary clip while retaining the position of the connected clip in the secondary storyline. A bonus tip is offered which showcases how to have the override connections command in place until you turn them off. Holding down the tilde key and the command key, let go of the tilde key and the override command will be active until you press the command key again.

Overall, this collection of tips got me excited at how much faster I could move FCPX, and knowing how to navigate the tedious nature of the secondary storyline.

Fast Editing With Clip Skimmer

In another edition of MacBreak Studio, the folks at Ripple Training offer insight into using the clip skimmer to navigate the intricacies of the primary and secondary storylines. With clip skimming enabled and the main skimmer disabled, users can focus on clips solely in the primary or secondary storyline. Using the clip skimmer enabled and the main skimmer disabled, they are able to make targeted ripple edits in primary and secondary storylines without effecting the entire timeline. They also highlight how much easier it is to insert clips into the secondary storyline when the clip skimmer is enabled so that you can be a power user.

Starting Up FCPX

When you open FCPX from the dock or applications folder, it usually opens the last library or libraries you were working in. But what if you want to select which libraries FCPX opens upon startup? The folks at fcpx.at inform us that by holding down the option key at startup, you will be presented with a dialog box showing you all available libraries. Selecting one of the available libraries or using the Locate function to add another library will open that library in FCPX.

Another way to chose which library opens when you start FCPX is to use the inexpensive companion application, Library Manager. The application has the ability to create libraries from scratch and open libraries by themselves if you chose.

Overall, I’ve found these tips to be extremely helpful in getting much more knowledgeable about how FCPX functions. Learning these tips have given me a great appreciation for the application and has suppressed my frustrations I had when it first came out. Try these tips yourself and become the power user of FCPX that you want to be.

Royalty Free Music

Sci-FI VFX Tutorials

Screen Shot 2015-11-20 at 1.50.48 PM

With the upcoming release of Star Wars the Force Awakens, and the premiere of the recent Star Trek films, there have been many visual effects that filmmakers have looked to replicate to bring to their productions. This can be anything from heads up displays, 3D spaceships, weapons, and much more. Looking at these effects as they are, it would be a daunting task to replicate them without prior knowledge. However, using a tool like After Effects can bring your imagination to life by watching the right tutorials. Below, I will highlight a few tutorials based on science fiction visual effects that you can bring to your video projects.

Lightsaber Tutorial

In this tutorial from VideoCoPilot, Andrew Kramer shows us how to use his lightsaber preset which he created using the beam effect along with other filters and expressions. This preset has all the functions you would need to create the perfect lightsaber effect without having to use a solid layer with a mask. This preset also reacts to composition motion blur to create realistic motion. Using an obscure layer as a matte, you can place the lightsaber beam behind your talent when their motion calls for it.

I recently used this preset on a set of commercials and it still holds up eight years after it was initially released. I found it easier to use and manage over a plugin like Saber Blade from Fan Film FX. You can download the preset here and use it on your next Star Wars fan film.

Transporter Tutorial

In this tutorial from SternFX and Red Giant TV, Eran Stern breaks down how to create this infamous Star Trek teleportation effect using Trapcode Particular. Using the path from a circle math, Eran creates a circular motion for the point light which influences the motion path for Particular. Next, he parents the light to a null object so that he can influence the motion even further. With Particular applied to a solid layer and the settings manipulated to emit a solid stream of particles, the transporter effect begins to take shape. Once he has the effect created with Particular, he precomposes it and duplicates it to manipulate other iterations. With a lens flare from Knoll Light Factory and a few animation keyframes, he completes the overall animation necessary to apply to it to his subject.

In a separate composition, he brings the transporter effect and talent to the forefront. Using warping filters and masks, he completes the effect with ease. What I like about this tutorial is the attention to detail that Eran brings to this effect. I’ve seen this effect achieved using particle images from Particle Illusion, which is passable to the common viewer, but this version of the effect really has the Hollywood finish to it. Although it is a dated tutorial, I find it still holds up after all these years.

Hologram Tutorial

This tutorial from PixelBump shows us how to create a Star Wars themed hologram using green screen compositing. He creates three compositions with his keyed talent and changes their colors accordingly using the Levels effect. With the addition of the wiggle expression to create jerky motion, he crafts the colorization needed to create the hologram along with the Venetian Blinds filter. With a combo of offset matte layers and glow filters, he is able to complete Star Wars-esque hologram.

This effect was achieved using native filters and techniques that exist inside of After Effects which makes it accessible to everyone. I recently had to do a hologram effect for a group of spots and I went the third party route using Holomatrix to create the effect. It is always useful to know how to create visual effects when you don’t have access to to third party tools.

These are just three science fiction effects-based tutorials you can use on your next video projects. Try these out and experiment to create something unique.

Royalty Free Music

After Effects Add-Ons

after_effects_cs51

Being one of the longest industry standard post production applications in the world, you would think After Effects would have every function to make your life as an artist easier. With the ability to create vector shapes, rotoscope, track in 2D/3D, and more, it is a pretty comprehensive application. However, on its own it can only do so much. That is why there is a community of developers who have created add-ons for After Effects to make the user experience more bearable than before. These add-ons can make animating multiple layers more efficient, the creation of a folder structure at the project, and other features. I’m going to highlight three of these add-ons.

Mister Horse Previewer

 

web_Previewer_top_image_v2

This After Effects plugin is something that should have been in the program from the get go. With this plugin, you can view imported footage, images, and music in a separate panel and see the first frame of compositions. I can’t count how many times I wish I could quickly preview an asset without having to go through much hassle. Ever since I purchased this plugin, I feel more at ease when importing assets into After Effects knowing I can see them on their own without having to open the layer panel view them. You can purchase this plugin for $21 at Videohive.

True Comp Duplicator

 

truecompduplicator_lg

This is a script I’ve been using for the last two years and it has been an invaluable asset to my workflow. If you are a heavy After Effects user, you will know how much of a pain it can be to create duplicates of a composition which contain multiple precompositions. It’s not as simple as duplicating it from the project panel, unfortunately. What this script does is create a complete duplicate of a comp hierarchy, including sub-comps.  If a comp is used multiple times, the comp only gets duplicated once and all remaining references point to the first duplicate.  If the comps are arranged in a special folder hierarchy in the project panel, that folder hierarchy is preserved or duplicated (depending on user preference) for the duplicated comps.

Based on the tutorial provided by Lloyd Alvarez, this script is very in-depth and can is definitely a timesaver. The best part is that you can pay your own price to get this plugin.

Text Box Script

TextBox_preview

This free script from Motion Boutique creates a rectangular box around a text layer. A modern look for infographics and other motion graphics involves text being inside of a box. This script helps speed up the process of creating shape layers around the length of your text. I’ve used this script on a few projects myself and it has been a blessing to use. All I have to do is create my separate text layers, plug in my parameters for the script, and voila! I have a text box graphic. Grab this script now and see where it fits in your workflow.

Sound Effects

Nodes 2 from Yanobox

Nodes-2_Packshot-+-Hosts

Avengers. Ender’s Game. Iron Man 3. Rise of the Planet of the Apes. These are just a few films that have had the opportunity to utilize the plugin known as Nodes. With the release of Nodes 2, Yanobox has upped the ante with what this plugin can do. This motion graphic tool can import 3D models, interact with the After Effects camera, link text and images to individual nodes, and so much more. The best part is it supports the most popular editing and compositing programs on the market including: After Effects, Motion, Final Cut Pro X, and Premiere Pro. If you don’t believe how awesome and intricate this plugin is, take a look at this demo below:

I’ve had a chance to try out Nodes 2 myself and I was extremely impressed with how quickly I was able to pick it up. Here are a few quick examples of what I was able to create on my own, which to my surprise, rendered very quickly on my iMac. On top of that, I like that I can create certain animations with ease compared to plugins like Trapcode Form or Particular.

Overall, Nodes 2 is an incredible plugin that needs to be experienced firsthand to admire its depth. With this plugin, I am able to create breathtaking and stylized motion graphics that would require multiple plugins and tinkering to achieve the look Nodes can create effortlessly. I’ve always been a fan of the Yanobox plugins, and this Nodes sequel more than lives up to its predecessor. I like how the controls are easy to experiment with, as well as the presets. The presets provide a great starting point and can be manipulated at will. The fine folks of Noise Industries have provided very detailed tutorials for your favorite software application, which you can check out here:

If you are looking for a plugin that imports stunning 3D models, build networks of node structures, and allows you to create an limitless amount of text and image connections, then look no further than Yanobox Nodes 2. At the price of $299, it’s a no brainer purchase that will save you hours of work and allow you to explore more creative depths than you can imagine.

Sound Effects

Best Drones for Filmmaking

quadcopter-512

 

In this new era of filmmaking, getting complex shots has become much easier thanks to technological advances made by vendors across the world. It’s more affordable to get a rising shot thanks to jibs and cranes that are accessible to even the most low budget filmmakers. Getting stabilized shots are easier now thanks to amount of rigs available. Aerial shots have now become cheaper due to the influx of drones available on the market. I want to highlight some drones you may want to consider adding to your filmmaking kit so that you can increase your production value.

DJI Phantom 3 Advanced/Professional $1,3000

Phantom-3-3-e1428477888137-1940x1089

This aerial drone is a new release from DJI and can capture great high quality footage from great distances. What makes this drone so popular is the following:

  • 3 Axis Gimbal camera which shoots HD (for the Advanced model) or 4K (for the Professional model)
  • Captures photographs at 12 megapixels
  • Live HD camera view via smartphone or tablet attached to the remote controller through the DJI app
  • Vision positioning through visual and ultrasonic sensors
  • Intelligent Battery with battery level indicator
  • Worry-free AutoPilot

As an owner of the DJI Phantom 3 Pro, I can attest to the incredible media captured with this camera. Within three days of learning to fly this drone, I was capturing great aerial shots that I would have had to pay a helicopter pilot to capture. With a $1,300 price tag, it is a steal for what you get from this drone. I would personally recommend this model for any prosumer or high end shooter who needs to capture aerial shots of client locations.

 

DJI Inspire 1 $3,399

 

inspire_1_20141105_0751

The DJI Inspire 1 is the more advanced and expensive model of the Phantom models offered. This drone is designed with strong carbon fiber arms and gives the user a full 360 unrestricted view when in flight. The Inspire features:

  • 3 axis gimbal 4K camera which shoots up to 30 fps, or 1080p up to 60 fps and takes photos at 12 MP
  • Optional dual remote control function
  • Powerful propulsion system
  • HD wireless video transmission
  • Vision Position system
  • Intelligent Power Management system

If I had the expenses, I would have considered investing in this. I would definitely say that this model is meant for high end, big budget filmmakers that have the funds to afford it.

3DR Solo Quadcopter $999.95

 

266

The 3DR Solo is an all-in-one personal drone with a great ease of use and powerful new features. Within these powerful features are the following:

  • Computer assisted cinematography through the Solo app
  • Attach a GoPro to gimbal harness and stream HD video from your GoPro to your iOS or Android mobile device, at ranges of up to half a mile.
  • Easy to use aerial photography controller
  • Powerful smart battery which displays remaining time
  • Up to 20 minutes of flight time with GoPro attached

I haven’t had the opportunity to try this drone, but based on the preview video above and the feature list, it has a lot to offer. With the ability to mount a GoPro, you know what type of quality you are getting. With a price tag of $1,000, you are getting an advanced video production tool that will give see a greater return.

Overall, these three drone models are great if you want to add aerial videography to your business and skill set. I’ve only began my journey into aerial photography, but already I feel that it has added much value to my current projects. I look forward to seeing what I can do next.

Royalty Free Music

Luca Visual FX Backgrounds & Overlays

Screen Shot 2015-06-29 at 10.29.30 PM

The team at Luca Visual FX has brought another product to the market which will benefit professionals across Mac and PC platforms. It is the incredible and extraordinary Backgrounds & Overlays. This product is an extremely versatile collection of 100 HD clips which are an indispensable addition to any editor’s library.

It is compatible with the following software:

  • Final Cut Pro 7/X
  • Adobe Premiere Pro
  • Adobe After Effects
  • Apple Motion
  • Avid Media Composer
  • DaVinci Resolve
  • HitFilm
  • Sony Vegas

I had a chance to test drive this new product.

What are Backgrounds & Overlays?

519440859_1280x720

It is a vast collection of 100 Full HD dynamic motion graphic clips designed to be used as backgrounds and/or overlays for a variety of projects. You can use them in promos, VJing, music videos, sports, news, corporate, and much more. On the dedicated web page at the Luca Visual FX site, you can preview the entire collection and see what each background has to offer.

What are some of the best ways to customize these clips?

Editors can use blend modes from their host programs, change the speed rate, scale, crop, position, or add any third party filter or built in effects to customize these clips. Also, stacking several instances of Backgrounds & Overlays allows the creation of complex and beautiful effects by simply using blend modes. Use effects such as blurring and distorting to maximize your customization. In this clip, I created some examples to showcase how far you can push these clips.

To see how these clips can be manipulated and integrated into your projects, take a look at this tutorial where I show you how to use them with footage and text:

Is it possible to get the Backgrounds & Overlays in a different format?

backgrounds-and-overlays-examples

All files are delivered as .mov files, so as long as the user has Quicktime installed everything should work correctly. If you need further assistance, you can contact customer support here.

Can you list some scenarios where these clips work best in?

Overlay #3 (0;00;00;00)

As mentioned above, they can be used for a variety of video projects. Here is a list of effects that I’ve done which you can try out yourself:

  • Video inside of text or shapes effect
  • Text backgrounds
  • Feathered shape overlays
  • Heads up displays
  • Frames and borders
  • Picture and picture background
  • Lower thirds
  • 2D & 3D animation inserts
  • And many more effects

Overall, I believe that Backgrounds & Overlays will be a product that users will turn to when they need to amp up their productions. With the dynamic range of motion graphics, and the fully customizable options that are available, the sky is the limit with creative opportunities. I strongly recommend that you download some of the demo watermarked clips and see what you’ve been missing. They are now available for download on the web page.

The launch price of Backgrounds & Overlays is $49.  Don’t miss out on this versatile product line.

For readers of this article, LVFX is offering a 10% off coupon when you make a purchase using this coupon code: BO2015S

Royalty Free Music

What is HitFilm?

61mzGFZhA+L._SX342_

With all the editing and compositing programs available for filmmakers on Mac and PC, it can be hard to decide which program suits your workflow. The general understanding of post production is that editing should be handled in one program, where visual effects and motion graphics are handled in another. Programs that utilize this workflow are Premiere Pro/After Effects and Final Cut Pro X/Motion. With Avid Media Composer, professionals cut in the program but usually go to programs like After Effects, Fusion, Nuke, or Motion for graphics work. However, there are programs that have the best of both worlds all in one package. Autodesk Smoke has both editing and node based compositing capabilities. Another program is HitFilm Pro. I want to discuss HitFilm Pro, and why you should consider using it if you want an affordable all-in-one post production software.

What is HitFilm Pro?

HitFilm Pro is an all-in-one editing and compositing program. Designed to handle projects on the small scale to big budget, HitFilm can withstand it all. Bundled with over 180 effects, and the ability to switch between editing and effects smoothly, this program can do some amazing things whether it is in 2D or 3D. Need to motion track titles to a moving object? HitFilm can do it. Need to make your talent look like they are flying through the clouds? HitFilm can do that. This piece of software is pretty comprehensive and is only limited by what you want to create.

What is the general workflow when using it?

First time users can take different approaches to post production when they use this software. Gone are the days of switching between apps to do essential parts of the post production pipeline. Now, you have the choice between doing compositing or editing. In the second video above, Axel Wilkinson shows us a general overview of the HitFilm interface and how users can get up to speed crafting their videos in no time. Switching between the editing tab to the composite tab is something we could only dream of in the past. That reality is here with HitFilm Pro.

What effects can I create in it?

Like I said before, what you create in HitFilm Pro is limited to your imagination. Below is a list of effects and compositing capabilities it possesses:

  • Chroma Keying
  • Live 3D Model Rendering
  • 3D Particle Engine
  • Mocha 4.0 for planar tracking
  • Fire, lightning, and weapon based effects
  • 3D camera projection
  • Color correction/grading

Essentially, it possesses the capabilities of the popular NLEs and compositing programs on the market. Many web-based filmmakers have used created effects with this program, which include Corridor Digital, Film Riot and Freddie W. The effects I’ve seen created by users of this program would blow away even the most capable pros.

Why should I buy it?

There are many programs you could be using to complete your post production work. Many of which are trusted to get the job done by seasoned professionals. However, just because one workflow is trusted and most used does not mean it’s the only one that matters. Using HitFilm Pro will give you the ability to have the best of two disciplines in one program. No need to farm your visual effects out to a separate application. You can do it all in the application by tabbing over. With HitFilm Pro, you finally get the program that let’s you be all things post production without much hassle. When you have the options that this robust program offers, it’s a no brainer.

Overall, the team at HitFilm have created a comprehensive and robust application that can tackle even the most daunting of projects while making it affordable to every filmmaker. Download HitFilm Express 3 for free or purchase the pro version for $299.

Royalty Free Music

Motion 5 Tutorials

icon256

Since its creation in 2004, Apple Motion has been an application that has evolved quite nicely, despite the fierce competition it faces from other apps like After Effects and Nuke. In its current iteration, Motion provides the plugin architecture for Final Cut Pro X, which means that all FCPX effects are actually Motion templates. With that advantage, users can create just about anything with Motion. Below are a few tutorials where Motion users illustrate how versatile the application is for their workflows.

Creating a Transition for FCPX

This tutorial highlights one of the core features of Motion, which is the ability to create custom transitions. Gone are the days of having to stack layers and utilizing keyframes. With a decent understanding of the Motion interface and its functions, users can create unique transitions to suit their video projects. In this particular example, the author shows users how to create a ripple flash transition from start to finish. When I discovered that you can create transitions and other effects in Motion, I decided to give Motion another try after years of being an After Effects user. I found this tutorial useful because even at the basic level, you can get an understanding of how far you can go with the creation of custom effects.

Animating a Photoshop File

There will be situations where your client wants to create a spot and you have no b-roll. Even worse, you have very minimal images to work with. However, they provide you with a layered, high resolution Photoshop file which you can animate and turn into a motion graphic with a little imagination. In this tutorial, Telemundo editor Brett Gentry shows us how he was able to take a client graphic and turn it into a 30-second spot using a combo of Motion and Photoshop. Utilizing markers, keyframes, and behaviors, he takes what I call a simple “Ken Burns effect” and makes an entertaining spot for an event. I will be first to admit that the Motion interface can be daunting at first glance, but watching how others work in it so efficiently inspires me to learn more.

Creating a Auto Green Screen Keyer with Background

There are projects you receive where the talent was shot on a green screen, and you need to key them out and insert the same background. If this is no more than five people, no big deal. However, if it is multiple talents and it needs to look like they were all keyed and composited the same way, it can become tedious. In the tutorial above, Brett shows us another way he uses Motion to create an auto keyer effect, which will allow him to key not only his talent, but insert/manipulate the background he wants behind them. This is convenient when you need to cut multiple spots or short form videos and time is not on your side. This effect is also a viable solution for the scenario I mentioned above with multiple talents. If you publish enough parameters and include the necessary assets, you can save a lot of time by creating an auto keyer effect in Motion.

Text Behind Glass Effect

I’ve highlighted the effects you can create in Motion for workflow tasks like titles, transitions, and effects, but it is always interesting to see how far one can push Motion to create things you would only expect in After Effects. This tutorial above is a prime example of something I wasn’t sure Motion could create. Editor/plugin author Simon Ubsdell takes a concept that originated in After Effects and creates it from scratch in Motion. Using textures, text layers, blend modes, filters, and behaviors, Simon creates this effect which can be used for promos, documentaries, or identifiers. I have to give kudos for the content that Simon has produced as of late. I’ve always believed the reason Motion wasn’t as popular as After Effects was because of the vast community and gurus that are out there. Seeing a dedicated user showcase Motion capabilities peeks my interest to add this tool to my skill set.

Overall, Motion has matured into a intricate and versatile tool that editors should take the time to learn. The market tends to favor the After Effects user, but every now and then there are jobs for people with Motion knowledge. Knowing this tool can benefit you in the long run.

Sound Effects

Film Impact Transitions Pack 3

Premiere Pro CS6

The creators at Film Impact have released a new pack of ten dynamic transitions for Premiere Pro just in time for the 2015 release. These transitions bring with it 3D movement, glows, glitches, flares, mattes, and much more. I’ve been using Film Impact transitions since their inception, and have all three packs in my collection. These transitions add that extra piece of pizzazz without being over the top. I had a chance to play around with these new transitions and see their capabilities. The four transitions below are some of my favorites.

Impact Solarize

Impact Solarize is a transition which takes the incoming and outgoing clip, blends them with a tinted invert and glow effect, then dissolves between them. In the Effect Controls, you can control a variety of parameters such as the glow, width, RGB values, contrast, and dissolve length. I’ve used this transition on recent video projects and it really flowed with the presentation and feel I was trying to establish. Overall, I like that I can change the colors and impact of the glow to get a unique look of my own, or I can use the default setting as is.

Impact Wave

Impact Wave is a transition that makes a wave like motion between your incoming and outgoing clip. I like to think of this transition as a combination of a zoom blur and a cross dissolve. With this transition, you can control the angle, motion blur, amplitude, colorization, and length. I haven’t seen anything like this from other vendors offering third party transitions. It’s very smooth and straight to the point. I highly recommend using it.

Impact 3D Roll

Impact 3D Roll is a transition that rolls your incoming and outgoing clip into a cylinder like motion. You can choose to roll it from a 45 degree angle, horizontally, or vertically. With motion blur properties available, users can choose whether or not they have it enabled, and how much of it they want. Users can also choose between the number of rolls, which ranges from one to three. The amplitude parameter controls the appearance of the roll, which means that a positive value yields the inside of a cylinder look while a negative value will give it a bulgy look. What I like about this transition is how versatile it can be, as well as it’s possible configurations. I’ve used this a lot on entertainment pieces and it definitely enhances the production value.

Impact Flare

Impact Flare is a lens flare transition that moves across the screen while dissolving from the outgoing clip to the incoming. Users have the ability to control a variety of parameters including the color, start/end points, shape, fog, and halo. While I’m a fan of this transition for its dynamic movement and ease of use, it would be even better to have some visual options of the parameters, like fog and halo. Overall, I’ve tried other flare transitions before, and this one renders more quickly and is great for a quick flare transition without a lot of fuss. This transition will be frequently used on some upcoming projects.

Film Impact Transition Pack 3 is a must have if you are a Premiere Pro user. In the time since these transitions have been available, I’ve seen great projects cut with this new pack, and you will have more creative options than before. Pick up this pack for $89, or all three packs for $179.

Sound Effects

Luca Visual FX Hi-Tech Overlays

Screen Shot 2014-03-25 at 9.28.26 AM

The team at Luca Visual FX have been working hard to bring a new product to the market that will benefit post production professionals across Mac and PC computers. It is Hi-Tech Overlays. This product line expands the alpha transitions and overlays that LVFX created in the past. This update brings a new model for users to access the elements they need at a moment’s notice. I’ve had a chance to preview the new library and had a chat with the guys of LVFX. Here are a few questions users may have.

What are Hi-Tech Overlays?

It is an alternative solution to our Hi-Tech plugins for FCPX that provides users of software such as Premiere Pro, Avid Media Composer, After Effects, Motion, and Final Cut Pro a way to build Hi-Tech mographs for promos, sci-fi, music videos, news and sport, corporate productions, and more.

Screen Shot 2014-03-25 at 9.09.47 PM

I see that you implemented a new system for the users to access the product. Tell us about it.

Yes, all mographs and images are provided in full resolution and the user will download from our web site only what they need any time they wish, right from the moment of purchase. We started working on this new way of delivering a product in December 2013 and hope to provide the easiest and most convenient way for our users to access a vast library of interchangeable mographs and images.

Screen Shot 2014-03-25 at 9.08.21 PM

Will the library be based on a subscription that you pay monthly, or is there a lifetime license?

No monthly subscriptions to pay, but only a single lifetime license that people can easily purchase on our web site. The user will receive unique and safe login details shortly after completing the payment, and will be able to download both Hi-Tech default looks of effects like holograms, displays, sci-fi mographs, fractals, etc., and individual elements to customize and combine as desired. The library also includes High-Tech Elements Vol.1.

Screen Shot 2014-03-25 at 9.10.26 PM

I have issues with Quicktime on my PC. Is it possible to get the Overlays in a different format?

All files are delivered as .mov, so as long as the user has Quicktime correctly installed everything should work correctly.

Screen Shot 2014-03-25 at 9.13.31 PM

Will there be tutorials on how to achieve the results you showed in the demo?

Yes, we have already edited four of them and more will come. They show how to customize not only the elements, but also how to combine them creatively in order to create unique looks. The first four are available on VIMEO.

If I own the FCPX templates of this product, is there a way to get access to this library to get additional elements?

Hi-Tech Overlays is essentially a cross-platform alternative to Hi-Tech for FCPX that will work with more hosts. FCPX users would find in the library what they have already in the form of FCPX templates. There are, however, several advantages in using individual layers. We also intend to expand the library and add more and more elements for our users. Should FCPX users wish to access the library in order to handle individual layers, we recommend to email support@lucavisualfx.com with their request.

What manipulation options would allow you to get the best results with Hi-Tech Overlays (i.e color change, distortion, time remapping, etc.)?

There are tons of ways to modify the overlays. The only limit is one’s creativity. For example, with filters, the user can indeed change the color and distort (some examples can be seen on the demo) but also add glow, blur, and many other stylizations. Another way to create unique compositions is to combine individual elements taken from different categories (i.e. Holograms and sci-fi overlays or Screens and Fractals, you name it), use blend modes to create nice superimpositions and layers. Another great advantage that not even the FCPX template can offer in such extent is the use of any transition you can think of in order to create your own Build-In and Build-Out at the beginning and end of your composition. An example is shown at the very beginning of the demo where all elements come together in different ways. Possibilities are endless!

Screen Shot 2014-03-26 at 8.19.22 PM

Do these elements come with embedded alpha transparency? If they don’t, what would be the best practice for getting transparency?

Yes, absolutely, the alpha channel comes with every single element of Hi-Tech Overlays.

Screen Shot 2014-03-25 at 9.22.10 PM

Overall, I believe Hi-Tech Overlays will definitely be a product with infinite possibilities for the user. The amount of ways you can mix and match the elements will definitely draw the user to think outside the box when they apply mograph to their projects. I strongly recommend that you try experimenting with different colors and manipulation effects to see how far you can push each element. In the process, you may create a unique look that wasn’t thought of before.

Royalty Free Music

VideoWall Plugins for After Effects

after_effects_cs51

One of the most common motion graphics you see on broadcast television, as well as motion pictures, is a video wall. A video wall consists of a grid of multiple videos all playing at once. In many examples, this is usually used to highlight a specific theme or subject, and is accompanied by text or other motion graphic elements. Creating video walls manually can be tedious if you don’t know how to start. But, nonetheless, it can be done. If you opt to go the third party plugin route, below are three plugins/tools from different companies for After Effects that can jumpstart your video wall creation.

Coremelt Video Wall Zoom & Panel Vision

coremelt_logo

Within the Coremelt Complete suite are two plugins I use to create a video wall. The first one is Video Wall Zoom from the ImageFlow FX collection. This generator creates a wall of images/movies, one of which zooms in to fill the screen, then zooms back down. Another just zooms in to fill the screen. Not only does it come with enough image/movie placeholders, but it also has an animation option that can be utilized in more ways than one. With the multiple image placeholders and animation settings, it can be used as a standalone motion graphic, or a chapter transition between segments.

Screen Shot 2015-05-26 at 7.04.25 AM

The second plugin from the Coremelt Complete set I would turn to for video walls is Panel Vision. Panel Vision is a part of the Shatter collection, which contains “3D” perspective plugins with interesting effects. Panel Vision allows you to tile up to eight source images randomly into any number of rows and columns. It’s great to use when you want to cram four to five videos into a wall with little effort. You can also combine with other plugins like I did in this tutorial below and get a circular shape.

BCC Wild Cards

boris_logo

BCC Wild Cards is used to generate an array of 3D cards with interesting and convenient animation options. This filter is a part of the Particles category in the Continuum Complete suite. It can be used to divide up one video into rows and columns of cards, or multiple videos into rows and cards. Below, After Effects guru Kevin P. McAuliffe shows us the possibilities you can achieve when using BCC Wild Cards with multiple videos.

One of the reasons I like this filter for video walls is the ease and flexibility in the control options. They are very straightforward and can have you up and running in little time. I have used it myself when I made a promo for my Premiere Pro project file giveaway, which you can see below.

I highly recommend giving this plugin a try if you want a quality filter for doing a quick video wall animation.

Red Giant Planespace

RedGiant_logoBox2_White

Planespace is a compilation of tools that are made to help manage large amounts of 3D layers in After Effects. Within this compilation are Cubic Distribution, Box Creator, Cylinder Creator, and Matrix Creator. One tool in particular that is great for creating a video wall is Matrix Creator. This tool can set up rows and columns with ease along with predetermined animated parameters. I’ve used this tool a few times when I wanted to create a video wall using 3D layers in After Effects, as opposed to having it contained within a filter. With Planespace, I can use an unlimited amount of layers to achieve the look I want. With this ability comes the caveat of slowing down After Effects if you have too many 3D layers.

Screen Shot 2015-05-26 at 7.05.07 AM

Overall, Planespace is great when you want to push the boundaries of After Effects’s 2.5D layers.

These are just some of the incredible tools and plugins you can use to create a video wall for your projects. Feel free to give them a try and add to your arsenal.

Exporting/Compression Applications

ATeam icons

Exporting your edit out of your NLE is one of the many important processes of post production. In the tape-based days of exporting, it could be a very tedious and time consuming process that required a lot of quality assurance. With the digital era of video and web based content taking charge, exporting your videos isn’t as hard as it use to be. As a video producer, it is my job to know what specifications are necessary to deliver to my broadcast and web vendors to ensure that my commercials get aired properly. That is why I need to know all the available media compression applications on the market. I’m going to highlight three applications that I’ve used for the last five years to get the job done.

Adobe Media Encoder

Adobe_Media_Encoder_CS6_Icon

My go to compression/exporting application for the last four years has been Adobe Media Encoder. In times of fast turnarounds and very specific video types, Media Encoder has been clutch more times than I can count. Since I’ve been using the Creative Suite/Creative Cloud, Media Encoder has been apart of the bundle. Long before Premiere Pro had the ability to export media from the application itself, you had to queue in Media Encoder to get the final render you needed. The latest iteration of Media Encoder is a stable and reliable application that is able to meet vendor specifications much easier than anything I’ve used previously. Whether I need Quicktime files or mp4 files, it gets the job done. Below are a few abilities of Media Encoder:

  • Match Source presets
  • Exporting Closed Caption data
  • Import and export of Avid DNxHD assets
  • Support for new formats such as Sony 4K AVC-Intra (XAVC), Panasonic AVCI-200, DNxHD in an MXF container, XDCAMHD in a QuickTime (.mov) container, and more

Apple Compressor

icon128-2x

The next compression/exporting application I used quite often is Apple’s Compressor. Compressor has been apart of the Final Cut suite for the last decade, and the latest installment is much stronger and efficient than before. I’ll be honest about my use of Compressor. I used it mostly when I needed to make DVDs or seldom used file types. It got the job done until I shifted to an Adobe workflow. It could be that the computer I had previously wasn’t strong enough to harness its true power. Overall, I found Compressor to be a backup in case Media Encoder failed to deliver what I needed. I have found that the latest version of Compressor works great when I edit with Final Cut Pro X. It creates great master files and web ready H.264 files very efficiently and clean. It even creates video files for iTunes app display. In my opinion, it is one of the best compression/exporting applications on the market and shouldn’t be overlooked. Below are a few features of Apple Compressor:

  • Intuitive interface
  • Streamlined workflow
  • Share Final Cut Pro settings
  • Encoding available for Apple devices
  • Broad format support and more

MPEG Streamclip

MPEG-Streamclip-icon

MPEG Streamclip is a free application available for Mac and Windows which can open a variety of file types, as well as transcode to a variety of formats. In my opinion, this application was at its peak when most NLEs couldn’t take raw formats like H.264 from DSLRs. With most NLEs now supporting raw format editing in real time, this application has become more of a last resort compression application when you have no other choice. When I edited with Final Cut Pro 7 and Premiere Pro CS5, using this application to transcode footage was a common part of my workflow. These days, I help new  filmmakers learn to use it when they don’t have access to the aforementioned applications above. Overall, MPEG Streamclip is still a versatile application and I believe you should have it in your arsenal just in case. Below are a few features of MPEG Streamclip:

  • Lets you play and edit QuickTime, DV, AVI, MPEG-4, MPEG-1, MPEG-2 or VOB files. Transport streams with MPEG, PCM, or AC3 audio (MPEG-2 playback component required), DivX (with DivX 6) and WMV (with Flip4Mac WMV Player).
  • Saves edited movies as MOV files, and (when possible) as AVI or MP4 files.
  • Handles files and streams larger than 4 GB, split in any number of segments, or with multiple audio tracks, and can also optionally handle timecode breaks. It is compatible with MPEG-1 and MPEG-2 video, MPEG layer 1/2 (MP1/MP2) audio, AC3/A52 audio, and PCM audio.
  • Supports batch processing: just drag some files in the batch list, choose a conversion and a folder, click the Go button, and MPEG Streamclip will automatically convert all your files.

As you can see, these three applications are very capable of creating deliverables necessary to get your project out. While there are other applications like Sorenson Squeeze, Red Giant Offload, and camera based conversion programs, these programs have shown that they can perform at the top level. Feel free to try them out and find out what works best for you.

Royalty Free Music

New Features in FCPX 10.2

FCPX_logo_1

Since NAB happened last week, we were introduced to all the new products and updates to various products for filmmaking. From more efficient user friendly drones, higher end cameras, and software updates, it was a filmmaker’s paradise. One particular update that caught my interest was the release of Final Cut Pro X 10.2. Some of the features that were introduced were needed, and some of them made motion graphics, visual effects, and color grading much easier. I want to highlight three features that I found interesting and offer an opinion on how they will be beneficial to your workflow.

FCPX: 3D Text

One of the newer and greatly appreciated additions to FCPX 10.2 is the ability to create and manipulate real 3D text. Users can tweak animations, materials, reflectivity, and many other options with this new feature. In the past, if you wanted 3D text in your edit, you would go to plugins like Element 3D, mObject, or a dedicated 3D program. From what I’ve seen and played with myself, this is a very intricate feature, and one that requires quite a bit of computing power to truly witness its potential. It would be wise to have a strong Mac on your hands if you plan on utilizing this feature. This 3D text feature is great, and I believe it may minimize the need to run to third party plugins. Many FCPX plugin makes have already stepped up to the plate, such as Ripple Training, MotionVFX, and Stupid Raisins. They offer their own 3D text assets for users to utilize in their projects. I can only see this feature becoming stronger in later updates.

FCPX: Save Effects Preset

save-presets

This feature has been long asked for and it finally has appeared; the ability to save effect presets for later use. In the legacy Final Cut Pro, this feature was present along with the ability to save presets in a project. In FCPX 10.2, you can now have saved effects appear in the effects browser, which is much easier than having to do paste attributes all the time. I haven’t had much time to play with this new feature, but if it functions like people say it does, then it is very welcomed.

FCPX: Improved Masks & Color Correction Effect

draw-mask-detail

color-correction-effect

The masking feature in FCPX 10.2 now allows their own category in the Effects browser, as well as the ability to keyframe them much easier. The new Draw Mask filter gives you the ability to draw masks which can be linear, bezier, or B-spline smoothing. Also, the Shape Mask now has the ability to convert control points into editable bezier control points. One of the many strengths of FCPX was how strong its masking capabilities were in comparison to other NLEs, and this new feature definitely ramps up its strength. Much more compositing options will now be doable without leaving the comfort of your NLE.

Another new feature introduced is color correction is now an effect. In the Effect Browser, you can choose the Color Correction effect and place it on your effect. From there, it will open up the Color Board and allow for further tweaking. Since it is now treated as an Effect, you can apply color correction before video filters, or insert multiple color correction filters anywhere in the stack of video filters. After you stack and arrange the processing order of multiple corrections and filters in the Inspector, you can save this look as an Effects Preset for for re-use.

ccstack

As you can see, the new features available in Final Cut Pro X 10.2 have shown that Apple is serious about the filmmaking community. In time, I hope they address other grievances editors have with the program so that it can be an easier sell to hold outs. Overall, I think these new additions showcase how much potential lies within this program, and I look forward to what they will include next.

Royalty Free Music

HUD & UI Tutorial Round-Up

after effect

With movies like Iron Man, Ender’s Game, and Star Trek featuring future technology, we’ve seen a lot of floating H.U.D.s (heads up displays) and UIs (user interfaces) that showcase the intricate nature of this technology. Whether it’s Tony Stark’s helmet, or onboard the USS Enterprise, these visual effects have become a mainstay in a lot of blockbuster films. With the current technology trends, we are definitely heading in this direction, so creating them for films is quite a thrill. The amount of time and techniques required to create these can be daunting, but once they are complete, they are quite a sight. Below are a few tutorials that showcase how you can create these in After Effects alone, or use After Effects along with other Adobe programs.

HUD Interface Basics

From Sam’s Creative Toolbox, he demonstrates how to create a basic HUD interface element. Using a combination of shapes, colors, filters, and null objects, he is able to create a HUD element that can be tracked to your talent or other footage. This type of element is very common when creating HUDs, and you tend to see a various of this element when you see very complex HUD interfaces. Overall, this tutorial is very thorough and great to follow if you want to know some advanced techniques for creating HUD elements.

UI Animation Prototypes

In this tutorial from Chuck Yeager, he shows you how to utilize Photoshop and After Effects to create an app animation user interface for a smartphone. With the user interface created in Photoshop, the user can bring that Photoshop document into After Effects and manipulate the layers at will. I have always believed that After Effects was the Photoshop of the video world, and using them together can really open a lot of creative doors. Chuck goes onto show us that with interpolated keyframes and motion blur, you can create an app animation that can be the basis of showcasing a functional user interface in a demo. In the past, I have had to create app animations before, and have used either Photoshop or Illustrator to create them. I believe Illustrator is a strong source for custom layers since it is based on vector assets. However, you may not always have the luxury of vectors, so it is good to know how to manipulate Photoshop’s rasterized layers.

Quick HUD Targets & Elements

In this three minute tutorial, motion graphics artist Lee Daniels shows us how to create HUD targets and elements. Using multiple shapes and expressions, he teaches how to compose a HUD element that looks something similar to what would be in Iron Man’s helmet. It’s quite amazing to see how quickly you can create a HUD element in less than five minutes following this tutorial. Most people make it seem very tedious and time consuming, but Lee definitely knows how to highlight crucial information and keep a fast pace. The best part about this tutorial, is that this is one of the many quick tutorials Lee has on creating these elements.

As you can see, creating HUDs and UI in After Effects is quite a technique to know. These elements have the ability to give your films a techy feel and showcase how intricate a scene can be. Try any of these tutorials and see what you can create.

Royalty Free Music

Lower Third Tutorial Round-Up

ATeam icons

Lower thirds, supers or CGs as they are also called, are those graphics you see on the screen when someone is being identified. You see them on reality television, the news, sports games, and documentaries. They usually have one to three tiers which can have the person’s first and last name at the top, and at the bottom, an occupation, residency, or position they occupy. Another characteristic of lower thirds is that they are placed in the title safe area of the screen so they don’t get cut off (these are usually network specifications). One thing about lower thirds is that they are by far the most sold item on motion graphics marketplaces. You could go to a variety of sites and look at galleries of lower thirds which you can purchase for your own videos. However, you may not always have the luxury of purchasing lower thirds, so it helps to know how to create these from scratch to keep costs down. In the three videos below, I highlight tutorials for how to create lower thirds from scratch for programs such as After Effects, Premiere Pro, and Motion. After you take a look at these videos, you can apply some of the knowledge you’ve learned and get to creating your lower third graphics.

Lower Third (After Effects) Tutorial

In this After Effects tutorial, Phil Ebiner shows us how he creates simple and clean lower thirds. As he states in the tutorial, he looks to other sites for inspiration before he starts creating. Utilizing a combination of solids, masks, and shape layers, he is able to create a lower third that would work in just about any occasion. When creating lower thirds, it takes a lot of layers to achieve the ideal look so be prepared for using precompositions, parenting, and lots of keyframes to maintain a clean and organized timeline.  What I like about this tutorial is that it has nice pacing, and within less than 20 minutes, you can have a lower third that can be used and modified to your needs. If you are using After Effects CC, you can turn this lower third into a LiveText template for use in Premiere Pro. If you aren’t as skilled in After Effects and prefer Motion instead, you can learn to create lower thirds there as well.

Lower Third (Motion 5) Tutorial

In this Motion 5 tutorial, author HalfGlassFull shows us how to create a complex lower third for broadcast. He first sets up his placeholder text layers in the position he wants. From there, he begins creating different shapes as a background for the text layers. Once he sets up the design of the lower third, he begins to implement behaviors to animate elements of the lower third to his liking. To finish it off, he shows you how to publish the lower third for use in Final Cut Pro X. Overall, this is an easy to follow tutorial and really helps reduce the learning curve that some people may have when using Motion for the first time. Also, the ease at which Motion projects can be integrated into Final Cut Pro X for multiple uses. As great as it is to create lower thirds in graphics programs like After Effects and Motion, sometimes you want the ability to do it without leaving your NLE. Let’s see how to do this in Premiere Pro.

Lower Third (Premiere Pro) Tutorial

In this Premiere Pro tutorial, VideoSchoolOnline shows us how to create modern and sleek lower thirds in Premiere Pro. Now, most people wouldn’t look to see if Premiere was capable of this, but a seasoned user would know better. Using layers in the Title Tool, they are able to create a simple two-tier lower third which identifies the talent on the screen. To give it movement, they use position keyframes with a manipulated interpolation. To keep the timeline clean, he nests the lower third into its own sequence. I can tell you from experience that creating simple lower thirds in Premiere is easy. The one caveat is when you need multiple version, it can be a real hassle to deal with, so plan ahead. Overall, it is rather easy to create a quick lower third from scratch, even if you only have your NLE to rely on.

As you can see, creating lower thirds from scratch is a fun exercise and a useful skill to have as an editor. There will be situations where purchasing one seems more viable than creating one from scratch. Depending on the project and client, it benefits you to know how to create one, but also know where to purchase one. Feel free to seek out other tutorials which show you how to create even more complex lower thirds so you can impress your clients.

Sound Effects